Friday, May 24, 2013

PVC Candle Prop Tutorial

This is a tutorial is on how to make fake candles out of PVC pipes. They look great placed next to your NBC/Halloween props, and they are completely safe! You dont have to worry about burning the house down. This is how I Made them:

Supplies Needed                                                                                                           


1.5" x 2' PVC pipe (One pipe makes 2 or 3 Candles)
**To save money, cardboard paper towel rolls can be substituted for the PVC, but they will not be as sturdy, and may be crushed during storage**

1.5" diameter circles/discs cut from pink insulation foam 
(One for each candle)

Battery operated tea light candle for each candle
(3 pack/$1.00 @ Dollar tree)

Hot glue

White spray paint/Acrylic paint

Saw

Approx Cost: $10 or less

Time invested: 1.5 Hours



(Description corresponds with picture tutorial above)

1. Buy 1.5 inch x 2 feet PVC pipes* ( as many as desired) Cut the PVC into 2,3,4 Pieces. I was able to get 3 Candles of differing heights from one, 2 ft. segment. 
 1.5" diameter is the perfect diameter for the average tea light to fit perfectly.

2. Cut 1.5" diameter circles or discs out of foam. I used pink insulation foam since I had a ton left over from all my other projects. You can really use anything that will wedge snugly into the PVC pipe and create a shelf for the tea light. You can use expanding "Great Stuff" foam too, but its messy and takes much longer.

3. Buy battery operated tea lights. These are available at many stores, but I found a 3 pack for $1 at Dollar Tree.

4. Dry fit all the pieces together.

5. Once everything is perfectly fit, heat up the hot glue gun! Drip layers of hot glue all over the rim of the PVC pipe, try to simulate melting wax as best you can. You will go through lots of glue sticks during this project. (Dollar Tree sells packs of hot glue sticks! Pick some up while your getting the tea lights).

6. Spray paint the entire candle + hot glue drips white. 

7. After the spray pant is completely dry, give it a wash with a mixture of brown/black acrylic paint and water. let it settle in the cracks and discolor the bright white. This will give the candle an aged & antiqued look.

Comment if you have any question....  Good luck.

No comments:

Post a Comment